Default Web Management IP's and Passwords: *username / password - APC Devices (9630 SNMP Management) 2400, 8-N-1 apc / apc - AT&T Motorola (Netopia) 192.168.1.254, admin / (modem access code, on the bottom) - Checkpoint (Sofaware) Safe@Office Appliances 981 192.168.10.1, admin / PROMPT - HP iLO2 *Username AND Password are case sensitive. Try Administrator with cap 'A'. - HP Procurve (V1810-24G) 192.168.2.10, no password (Passwords must be min 8 characters) DST: Start, Week 2, Sunday, March 2hrs - END, Week 1, sunday, Novermber 2hrs - Offset, 60min - IBM IMM (RSAII) 192.168.70.125, USERID / PASSW0RD (0 not the letter O) - Kyocera FS3140MFP admin00, 4000 / 4000 - Linksys Routers 192.168.1.1, blank / admin - Linksys WAP4410N 192.168.1.245, admin / admin - QNAP 169.254.100.100:8080 or DHPCP, admin / admin *Use QNAP Finder program - SonicWall Appliances 192.168.168.168, admin / password - SonicWALL SonicPoint (Standalone) 192.168.1.20, admin / password - T-Mobile Mobile Broadband 192.168.0.1, admin - Wyse D90D7 administrator / Wyse#123 user / Wyse#123 - Xerox 3300MFP admin / 1111 ^^^^^^^^^^^^^^^^^^^^^^^^ Default IP's & Ports: - HP Web Management https://localhost:2381 - APC Power Chute NS https:// :3052, :6547 - Dell Server Administrator / Manager https://servername:1311 - AVG Update 77.67.44.206 - McAfee Update 208.69.0.0 - 208.69.254.254 siteadvisor.com ^^^^^^^^^^^^^^^^^^^^^^^^ Default Device authorization - Wyse Wyse Enhanced SUSE Linux (i.e. x50C) admin / admin, root / , thinuser / , guest/ Root/BIOS: Fireport ^^^^^^^^^^^^^^^^^^^^^^^^ ISP / Hosting POP3 & SMTP Settings - Go Daddy (SSL) pop.secureserver.net, 995 smtpout.secureserver.net, 465 (80) -------------------------------------------- ********************************************** ** WINDOWS 7 / VISTA ** * ********************************************** * * Boot problems (MBR, Bootsector, BCD, MissingOSLoader) * F8: Repair Computer * Vista / 7 Recovery: Repair Computer, System Restore * Bootrec in Windows RE (KB927392): /FixMbr, /FixBoot, RebuildBCD * MBRFix Utility (mbrfix /drive 0 /vista) * Bootloader 2gb boundary: * cd \windows\system32 * copy advapi32.dll advapi32.dll.original * copy winload.exe advapi32.dll * ren winload.exe winload.exe.original * ren advapi32.dll winload.exe * ren advapi32.dll.original advapi32.dll *-------------------------------------------- * * Printer: Cannot connect to Printer, Access Denied * Adjust Printer Policy locally for both Computer & User Configurations * User: Administrative\Control Panel\Printers * Computer: Administrative\Printers * Set 'Point and Print Restrictions' to disabled * *-------------------------------------------- * * Network Tuning in Windows 7 (http://www.sysprobs.com/windows-7-network-slow) * Disable Autotuning * View Stauts 'netsh interface tcp show global' * Disable 'netsh interface tcp set global AutoTuning=disabled' * Remove RDC (Remote Differential Compression) * Control Panel -? Programs and Features -> Windows Features -> Uncheck 'Remote Differential Compression' * Remove IPv6 * Clean DNS Cache * ipconfig /flushdns *-------------------------------------------- * * Remote Desktop (RDP) Port Number change: * HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-TCP\PortNumber *-------------------------------------------- * * Vista Privilege Escalation * Click Start, type CMD, hold CTRL+ALT+SHIFT and press Enter *-------------------------------------------- * * Remove cached network passwords * Control Panel -> User Accounts -> Manage Your Credentials, remove remembered password * *Shortcut, click on start type cred *-------------------------------------------- * * Administrative Account C$ * net user administrator /active:yes * net user administrator , replace the with your password * *Note this may turn off important security features such as IE Protected Mode and UAC * Alternative * HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\system\ * New DWORD Value, LocalAccountTokenFilterPolicy, 1 * Restart *-------------------------------------------- * * File Sharing & Firewall Access * Open Network Sharing -> Advanced Sharing * Turn on File and Printing Sharing *-------------------------------------------- * * PPTP VPN Fix * Enable Weak Crypto (40/56 Bit RC4 / 128 Bit RC4) * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Rasman\Parameters\AllowPPTPWeakCrypto=1 Restart *-------------------------------------------- ********************************************** ********************************************** ** DELL Junk ** * ********************************************** * * - Disable OS Install mode. Memory limited to 256MB * * - Booting / OS install bluescreen, Stop: 0x0000007B * Toggle SATA controller modes (ATA / AHCI) * Toggle RAID mode (AutoDetect) * * * ********************************************** WINDOWS 2008 (R2) MSG to send console messages. (Replaces net send) -------------------------------------------- MICROSOFT WORD - File size limitation and recovery Maximum file size = 512MB Recover and oversized file: - Rename file extension from .docx to .zip - Open it with the Windows Explorer and navigate to the subfolder word/media - Delete / Move big media files to get under 512MB size - Rename file extension back to .docx *Word may display some errors, because it can't find some files. Click Yes to recover -------------------------------------------- MICROSOFT OUTLOOK / EXCHANGE: - Message size limits: Both Send and Receive limits must match, otherwise the lower value is applied - Prevent AutoFormatting (i.e. when using ActiveSync and wireless device) In Outlook, File -> Options -> Mail -> Editor Options -> AutoFormat Tab Uncheck Built-in Heading Styles, Preserve Styles, Always AutoFormat Plain text e-mail documents - Printing Errors (mostly from Outlook only) Delete files in following folder C:\Users\username\AppData\Roaming\Microsoft\Outlook - View Message Options (2007 / 2010) Add "Message Options" to QuickAccess Toolbar File -> Options -> Quick Access Toolbar -> All Commands -> "Message Options" - Adding hyperlink in a Contact Field: <> must enclose hyperlinks with spaces - Signature Location: %APPDATA%\Microsoft\Signatures Copy to current user location - Copy AutoComplete information (NK2): 1.) Outlook 2010: C:\Users\%username%\AppData\Local\Microsoft\Outlook\RoamCache\ Copy old 'Stream_autocomplete' file to new (Check dates and Sizes) Outlook 2000-2007: C:\Documents and Settings\%username%\Application Data\Microsoft\Outlook Copy profile name.nk2 file. 2.) Place .nk2 file in %appdata%\Microsoft\Outlook (C:\users\username\appdata\roaming) (.nk2 must match Outlook profile name) 2.) Run outlook.exe /importnk2 - Password not saved: (KB290684) 1.) Try opening Outlook in Safe Mode (outlook.exe /safe) Third-party Add-Ins may be the cause 2.) Remove SID Subkeys of HKEY_CURRENT_USER\Software\Microsoft\Protected Storage System Provider * DO NOT remove 'Protect Storage System Provider" key * Not for use on Windows Vista 3.) Create new Outlook profile 4.) Close Outlook Rename folders in "%userprofile%\AppData\Roaming\Microsoft\Protect" Re-Open, enter password if prompted, close then re-open - Office 365 (Operation Failed) Win7: Open Credential Manager, Windows Credentials: Remove from Vault 'xxxxxx.mailbox.outlook.com (Do Not remove Autodiscover-s.outlook.com) - Out of Office Reply not working (Exchange Server required) Check Exchange System Manager -> Global Settings -> Internet Message Formats -> Default * -------------------------------------------- APC Discharge Problem Fix (Blinking Battery Lights) Option 1: Perform Manual Runtime (Not the same as Runtime Calibration in PowerChute) a.) Verify 30% load. Load cannot fluctuate more than +/- 5% or the UPS will shut off b.) Turn off APC PowerChute Services and disconnect cables (USB / serial) c.) Disconnect UPS from utility power and allow to run on battery until it turns off COMPLETELY d.) Reconnect and allow to charge Option 2: Reset UPS to normal operating status a.) Connect APC Serial Cable b.) Open Hyperterminal and set to 2400 8-N-1, Xon/Xoff c.) Press SHIFT+Y. Response should be "SM" d.) Press '1', pause for a second then press '1'. Response should be "PROG" e.) Press '0'. Response will be current state (i.e. 31) ('8C' is normal operating status) f.) Press and/or hold '-' to cycle until '8C' is reached g.) Press '+' to commit. Press 'SHIFT+R'. Response should be "BYE" -------------------------------------------- Disable IE8 First Run Customize Screen Open Group Policy editor (gpedit.msc) Computer CFG -> Admin Temp _> Win Comp -> Internet Explorer Enable 'Prevent performance of First Run Customize settings -------------------------------------------- Google Docs / Forms - Reset form counter 1.) Open the form editor & LEAVE IT OPEN 2.) Delete the form, verify form count is '0' 3.) Click on the form editor, edit one of the questions 4.) Save the form and close the form editor -------------------------------------------- Drive Letters - Manage Drive letters for USB storage devices Downloads\Utilities\USB Drive Letter Manager Create static drive letter mappings based on Device ID -------------------------------------------- Cisco Catalyst VLAN Create VLAN #vlan database #vtp server #vlan x name x_x, (#vlan 2 cisco_vlan_2) #exit #show vlan Add each interface to VLAN: #configure terminal #interface fastethernet 0/xx, (#int fa0/21) #switchport access vlan x, (#switchport access vlan 2) #end #show ip interface brief -------------------------------------------- PrimoPDF 'Save As' Doesn't appear Delete the PrimoSet.xml from %userprofile%\appdata\PrimoPDF\ folder -------------------------------------------- Windows Error: "not enough server storage is available to process this command" IRPStackSize problem, occurs after install of Acronis True Image Home 2010 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters, IRPStackSize If not exist, Add DWORD Value 'IRPStackSize' Value 27 Decimal - (per Acronis support, success noted) REF: Microsoft KB177078 -------------------------------------------- HP ProLiant Ml350 Clearing NVRAM (G5) Turn server off System Maintenance Switch, S6 to 'ON' (Clear NVRAM) turn server on, turn server off S6 to 'OFF' (Default) Observe Status LEDs Changing iLO2 GUI Language (Japanese to English) Install English Firmware and select Force Downgrade -------------------------------------------- SQL 2005 Make sure to unzip Disk one to 'Servers' folder and Disk two to 'Tools' folder, then run setup.exe -------------------------------------------- Winsock corruption Pinging oy with 32 bytes of data: (Wierd network problems; No RDP: Domain & DNS Problems) netsh winsock reset -------------------------------------------- Trend Micro OfficeScan 10 Web Console Password Reset Edit C:\Program Files\Trend Micro\OfficeScan\PCCSRV\Private\AuthorStore\TrendAuthDef.xml At the bottom find the user root and change the "Pwd" value to "!CRYPT!523F7DC2E525044E2800FCDEA7E5D78B70C0A4165387060525E3EE66D5D2D2F460EA361E712B5F871FD473C7A6C" Your new password for root will be: trendmicro -------------------------------------------- Start 'Add/Remove Programs' using the command prompt: control appwiz.cpl -------------------------------------------- TCPSVCS process leaks memory Disable 'DNS dynamic updates' on DHCP & Restart Service REF: Microsoft KB939928 HOtfix download available -------------------------------------------- SNMP configuration (Windows) Click on properties of SNMP Service and select Security Tab (Community strings, SNMP host restriction -------------------------------------------- Windows Dialog boxes are empty regsvr32 jscript.dll REF: Microsoft KB831430 - Several dialog boxes are blank -------------------------------------------- Enable Task Manager Windows Registry Editor Version 5.00 HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System Set"DisableTaskMgr"=dword:00000000 -------------------------------------------- Can't Open EXE files 1. Type "command.com", (if 'cmd' doesn't work) 2. Change Directory to c:\windows Press Enter after typing each one. 3. Type copy "regedit.exe regedit.com" and then press Enter. 4. Type "start regedit.com" and then press Enter. 5. Navigate to and select the key: HKEY_CLASSES_ROOT\exefile\shell\open\command 6. In the right pane, double-click the (Default) value. 7. Delete the current value data, and then type: "%1" %* 8. Navigate to and select the key: HKEY_CLASSES_ROOT\.exe Verify the value of the Default string: 'exefile' 8. Close Regedit utility. Note: If you are using Windows XP and you enable "System Restore" , you need to disable "System Restore" in "Safe Mode" before using the instructions above. -------------------------------------------- Perflib / Counter Errors Use Extensible Performance Counter List tool to disable counters (Exctrlst) -------------------------------------------- SonicWall McAfee Update Fix with Content Filter Allow LAN (IP Range) to 208.69.0.0 - 208.69.254.254 (WAN) - ANY Allow LAN (IP Range) to ANY - Name Service (DNS) Add siteadvisor.com to Content Filter Allowed Domain list -------------------------------------------- Internet Explorer Registry Options Cache Settings: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\Cache\Content\CacheLimit: REG_DWORD - 4069 HEX = 40MB Cache Configuration: HKEY_CURRENT_USER\SOFTWARE\Microsoft\windows\CurrentVersion\Internet Settings\SyncMode5: REG_DWORD - 0: Never check for updates (always use cached page), 2: Check for updates one time per session, 3: Always check for updates. -------------------------------------------- Inactivate a Disk Partition type diskpart type list disk type select disk # (# is the disk number) type list partition type select partition # (# is the partition number) type inactivate type exit -------------------------------------------- HP Wallpaper - HPQ800H.BMP HKEY_LOCAL_MACHINE\software\microsoft\windows\currentversion\setup HKEY_USERS\.DEFAULT\controlpanel\desktop -------------------------------------------- Microsoft Expression Web Whenever Outlook is opened, Expression Web attempts to install FIX: Disable Junk E-mail folder -------------------------------------------- HP Pavillion Notebooks - Restore Boot Press F11 -------------------------------------------- Remote Desktop Fixes (RDP): - RDP Enable (Remote) HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server fDenyTSConnections = 0 - RDP Data Encryption Error HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\TermService\Parameters Under this registry subkey, delete the following values • Certificate • X509 Certificate • X509 Certificate ID -------------------------------------------- Windows Server 2003 IIS MIME Type for *.* i.e. .cfg -- application/octet-stream, .prc -- application/octet-stream -------------------------------------------- Microsoft Word 2007 - Undo Double Spacing Click on Page Layout Click on Paragraph Dialog box (Sub-Menu) Adjust Spacing (Before & After = 0, Line Spacing = Single, At = blank Click the 'Default' button to adjust the Normal.dot, follow instructions -------------------------------------------- McAfee AVERT Labs Daily DATs released 6:00PM (GMT), 1:00PM (EST) REF: McAfee KB40192 ------------------------------------------------------- -------- Outlook Express Spell Check unavailble or missing dictionary (i.e. English) Install OE spell checker http://www.flintnetworking.com/downloads/OE-Spell_Setup-v2.1.exe Set as default Email program (Manually) http://support.microsoft.com/kb/306098 "c:\program files\outlook express\msimn.exe" /reg HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail\Outlook Express Create / Verify String, Value Name=DLLPath, Value Data=%ProgramFiles%\Outlook Express\msoe.dll -------- ------------------------------------------------------- Microsoft Word 97 Proof Tools not working (i.e. Spell check) Delete the problematic subfolder from the following key (Grammar, Hyphenation, Spelling, and Thesaurus) HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Shared Tools\ Proofing Tools *ALT. HKEY_CURRENT_USER\ SOFTWARE\ Microsoft\ Shared Tools\ Proofing Tools Give user administrator permissions -------------------------------------------- Hitachi, How to read model numbers HDS721010CLA332 = 1TB, 32MB buffer H = Hitachi D = Deskstar S = Standard model 72 = 7200 RPM 10 = Full capacity—1TB 10 = Capacity this model, 10 =1TB (75 = 750GB, 64 = 640GB, 50 = 500GB, 32 = 320GB, 25 = 250GB, 16 = 160GB) C = Generation code L = 26.1mm z-height A3 = Interface, SATA 3Gb/s 3 = 32MB buffer (6 = 16MB, 8 = 8MB) 2 = Reserved -------------------------------------------- -------------------------------------------- Verizon Krazr Enable Test mode... #073887* for security code enter 000000 press OK. arrow down to test mode... press right soft menu key to select. Highlight Enabled and press select. To enter test mode... Press CLR followed immediately by the left soft key. (Timing is critical!!) You will be brought to a white screen with a "blue" FTS in the top center and the phone will be unresponsive for a brief period. If that doesn't work you can try.... Press and hold END to exit out and power off, then power the phone back on.. And you should be brought into the FTS screen. NOTE: On some phones, test mode being enabled doesn't survive power off/on. Once in test mode... Press the right soft menu key 3 times to get the the screen with ServOPT: at the top... and HDR PREF as a choice. Use the down directional arrow aprox 5 times to select HDR PREF... Press the right soft menu key to change it to CDMA. NOTE: phone may become unresponsive for a few seconds... OPTIONAL: use the down directional arrow once to select HDR Hybr: and press the right soft menu key to change it to OFF. (This is a case of "your mileage may vary", some DO need to set HDR Hybr: OFF!!) NOTE: phone may become unresponsive for a few seconds... Press the CLR key quickly followed by the left soft menu key to exit you out of test mode. Disable Test Mode... #073887* for security code enter 000000 press OK. arrow down to test mode... press select. Highlight DISABLE and press select. Press END to exit out of all... ----------------------------------------------------------------------------------------------------------- *** How to Disable the 'Insert' in Windows *** 1.) Open up your Microsoft Word and click on the "Tools" menu. Choose "Customize" from the drop-down list. This will open the Customize window. 2.) Select "Options" from the top tabs and hit the "Keyboard" button on the bottom of the window. 3.) Scroll through the Categories list until you come to "All Commands" and highlight it. Move over to the Commands list and select "Overtype". 4.) Click on the word "Insert" under the Current keys box and select "Normal" in the "Save Changes In" box. Hit the "Remove" button on the bottom of the window. 5.) Choose the "Close" button on the Customize Keyboard and the Customize windows. Your have now disabled the Insert key from your computer. Tips & Warnings * Performing these steps will only disable the insert key for the logged in user. * To re-enable the insert key, return to the Customize Keyboard window and select "Reset All". Close out of all the windows and your Insert key will work again. This setting will change all your customizations to the keyboard and restore the default settings. -----------------------------------------------------------------------------------------------------------